Tutorial to Open and Disassemble Your Phone
The mobile phone has become our indispensable communication tool, and as time goes by, some conditions will happen to the mobile phone that make it unusable. Today, phonefix will share the tutorial of opening and disassembling the phone.
1. A screwdriver kit or kit can be very useful. These screwdrivers must have magnetic tips to hold the screws so you don't lose them.
2.Phone screen opener
3.Tweezers
4.Anti-static wrist strap
5.Anti-static gloves
6.Antistatic or ESD safety mats
7.Anti-static apron
8.ESD safety shoes
Note: It is very important to only use anti-static or ESD safe tools to open and disassemble the phone, because the small parts and SMD components inside the phone are very sensitive to ESD or static electricity and may be damaged if precautions are not taken to prevent static electricity.
How to open and disassemble a feature phone:
1. Remove and remove the battery cover and back of the phone. You should use a mobile opener to remove the back panel.
2. Take out the battery, SIM card and memory card.
3. You'll find a couple of small screws on the back. Using a suitable precision screwdriver, unscrew and remove all screws and place them in a safe box. These screws must be kept carefully so that they are not lost.
4. After unscrewing all the screws, remove the front cover or front panel of the phone.
5. Now you have the inner panel or skeleton of the phone. It is fixed on the phone PCB with screws. Unscrew and open all screws.
6. Remove the connectors of the monitor and camera, then pull out the monitor and camera.
How to open and disassemble an Android smartphone:
1. Carefully remove the back cover. Most people use nails for this, but you should always use your phone to open the tool. Modern smartphones have fingerprint sensors and antenna connectors on their back covers. So, be careful or you will damage these connectors.
2. Take out the battery. The removable battery is easy to remove. However, if your Android smartphone has a non-removable battery, it is connected to the board through a connector. Remove this connector first. The non-removable battery is attached to the bottom with double-sided tape. Carefully remove the tape and the battery comes out easily.
3. Remove the SIM card and memory card.
4. You'll find a couple of small screws on the back. Using a suitable electric screwdriver, unscrew and remove all screws and place them in a safe box. These screws must be kept carefully so that they are not lost.
5. After removing all the screws, remove the front cover or front panel of the smartphone.
6. Now you have the inner panel or skeleton of the phone. It is fixed on the phone PCB with screws. Modern Android smartphones and iPhones have 2 to 3 PCBs connected to each other using connectors. These PCBs come from different parts of the phone - the network part, the power part and the audio part. Unscrew and open all screws.
7. Remove the connectors of the monitor and camera, then pull out the monitor and camera.
Note: Modern smartphones have too many connectors that can easily break or become damaged. Therefore, be very careful when opening and removing them.
The tutorial on how to open and disassemble is shared here, I hope it can help you. If you still want to know more about phonefix, please leave a message in the comment area below.
Comments
Post a Comment