Using REFOX RP30 Programmer to Replace Battery and Delete Important Battery Messages

 Every mobile phone battery has a certain service life. You may need to replace your iPhone's battery for a variety of reasons, mostly due to poor battery health or a poorly charged battery. Then, next, we will share with you the steps and details that need to be paid attention to when replacing the batteries of the  REFOX RP-30 programmer.


Wondering how to delete this battery info? Then please continue to pay attention to the following article.

See how the REFOX RP-30 programmer removes "important battery messages" and modifies battery percentage data.

The battery can be roughly divided into two parts – BMS board and battery cell. The battery management system board mainly serves as a protection board but also saves battery data. The battery cell is where the power is stored.

First of all, we use a clamp fixture to separate the phone.

Remove the battery.

Then we need to solder the BMS board of the original battery to the new battery.

Remove the protective tape on the BMS board.

Disconnect the cathode and anode of the battery with a pair of scissors.

Please do not break the flex cable.

Remove the primary battery BMS board.

Pry apart the anode and cathode tabs.

Place them on the welding clamp fixture.

Put the battery cell with nickel-plated tabs onto the welding clamp fixture.

The cathode and anode tabs are located under the BMS board.

Please align the anode and cathode respectively.

Solder with the Qianli Spot Welder. Note that one end of the spot welding pen is placed on the conductor material (copper). The other end is placed at the point to be soldered.
Folder well the tabs after soldering. Apply the protection tape.

Folder well the tabs after soldering. Apply the protection tape.

Put on the protection bracket. Wrap another layer of protection tape on the outside.

Connect the programmer to the laptop.


Then connect the battery to the programmer. Click reading. Recalibrate the cycle times and battery efficiency.

Connect the power cable to turn on the phone. “Important Battery Message” is displayed.


Then we turn off the phone and install the new Original iPhone battery. Go to “Settings” to view the battery health information. The maximum capacity is 100% and there is no “Important Battery Message”.


That's all for today's sharing. If you want to know more about phonefix, please leave a message in the comment area below.

Comments

Post a Comment

Popular posts from this blog

Solve welding troubles and improve work efficiency

Image
Soldering is an indispensable step in the process of electronic repair and assembly. However, for many technicians and enthusiasts, welding often encounters some common problems, such as overheating of solder joints, damage to components or loose soldering. These problems not only affect the quality of welding, but may also cause the functional failure of the equipment, thereby wasting time and money. There may be many reasons for these welding problems, such as using an unsuitable soldering iron, inappropriate welding temperature or insufficient welding skills. Therefore, in order to solve these problems, professional welding tools are needed to improve the accuracy and efficiency of welding. In order to meet these challenges, AIFEN provides a series of high-quality welding tools. Among them, AIFEN A902 Double Welding Station and AIFEN A9 Soldering Station are two highly recommended products. AIFEN A902 Double Welding Station AIFEN A902 is a welding station equipped with a dual-channe...
Read more

Solutions to Solve Motherboard Failures

Image
 Motherboard failures are a common and difficult problem in modern electronic devices. Many users may experience problems such as the device failing to turn on, frequent restarts, or malfunctions when using their mobile phones or other electronic devices. These problems usually stem from circuit failures on the motherboard, damaged components, or poor soldering. To effectively solve these problems, using thermal imaging technology can help quickly locate the fault point, thereby saving repair time and costs. The MECHANIC iScout Thermal Imaging Camera Analyzer is a tool designed specifically for electronic equipment repair. It can detect temperature anomalies on the motherboard through thermal imaging technology, helping technicians identify potential fault areas. Using this device, users can intuitively see which components are overheating, allowing for faster repairs. Features: High-resolution imaging: Provides clear thermal imaging images for easy identification of problems. Rea...
Read more

How to quickly solve the trouble of Charging?

Image
 In today's fast-paced life, the frequency of use of devices such as mobile phones, tablets and smart watches is increasing. Many people often encounter the problem of insufficient power on their devices, especially when they need to travel or do important work. Slow charging of devices may be caused by insufficient power of the charger, faulty charging interface or the use of mismatched charging cables. These problems not only affect the efficiency of device use, but also increase the anxiety of users. There are two main ways to solve this problem: Choose a more powerful charger: A high-power charger can provide a faster charging experience and save waiting time. Make sure to use compatible charging cables and interfaces: Using mismatched charging devices may result in slower charging speeds. Using charging methods designed for your device can significantly improve charging efficiency. Considering these issues, the MECHANIC V-Power series of fast chargers provides users with solu...
Read more