How to Quickly Clear The Smoke in The Air during Maintenance?

 In today's welding and electronic repair industry, the use of fume extractors has become increasingly important. There is an urgent need for a tool that can effectively absorb the fumes and harmful gases during the welding process to protect the health of operators.



Problems encountered during maintenance

1. Weakened suction

After long-term use, many users find that the suction power of the fume extractor gradually decreases. This is usually caused by the filter being blocked by dirt or welding fumes.


Solution:

Check and replace the filter regularly. This is key to ensure the normal operation of the device. It is recommended to clean or replace the filter every few months.


2. Excessive noise

Some users reported that the device is noisy when running, affecting the quiet working environment.


Solution:

Check whether the fan of the device is blocked by foreign objects. If so, clean it out.

Consider placing sound insulation pads at the bottom to reduce vibration and noise.


3. Failure or failure to start

It is a common problem that the device suddenly stops working during use. This may be related to the power supply, fuse, or internal circuit.


Solution:

Make sure the power connection is normal. You can try to change the socket or power cord.

Check if the fuse inside the device is blown. If so, replace the corresponding fuse.



Related product introduction

In addition to the above fume absorber, there are some other excellent fume extractor products


LED light: This device has ample light and is suitable for maintenance workbenches.


Smoke remover with fan: Suitable for use when there is a lot of smoke, it can blow away the smoke during repair in time.



Conclusion

With the development of technology, the design and performance of fume extractors are constantly improving. Proper use and maintenance of these equipment are essential to ensure safe and healthy operations.

Contact PHONEFIX for insights to ensure the best return on investment for your specific screen repair needs.

Comments

Post a Comment

Popular posts from this blog

Solve welding troubles and improve work efficiency

Image
Soldering is an indispensable step in the process of electronic repair and assembly. However, for many technicians and enthusiasts, welding often encounters some common problems, such as overheating of solder joints, damage to components or loose soldering. These problems not only affect the quality of welding, but may also cause the functional failure of the equipment, thereby wasting time and money. There may be many reasons for these welding problems, such as using an unsuitable soldering iron, inappropriate welding temperature or insufficient welding skills. Therefore, in order to solve these problems, professional welding tools are needed to improve the accuracy and efficiency of welding. In order to meet these challenges, AIFEN provides a series of high-quality welding tools. Among them, AIFEN A902 Double Welding Station and AIFEN A9 Soldering Station are two highly recommended products. AIFEN A902 Double Welding Station AIFEN A902 is a welding station equipped with a dual-channe...
Read more

Solutions to Solve Motherboard Failures

Image
 Motherboard failures are a common and difficult problem in modern electronic devices. Many users may experience problems such as the device failing to turn on, frequent restarts, or malfunctions when using their mobile phones or other electronic devices. These problems usually stem from circuit failures on the motherboard, damaged components, or poor soldering. To effectively solve these problems, using thermal imaging technology can help quickly locate the fault point, thereby saving repair time and costs. The MECHANIC iScout Thermal Imaging Camera Analyzer is a tool designed specifically for electronic equipment repair. It can detect temperature anomalies on the motherboard through thermal imaging technology, helping technicians identify potential fault areas. Using this device, users can intuitively see which components are overheating, allowing for faster repairs. Features: High-resolution imaging: Provides clear thermal imaging images for easy identification of problems. Rea...
Read more

How to quickly solve the trouble of Charging?

Image
 In today's fast-paced life, the frequency of use of devices such as mobile phones, tablets and smart watches is increasing. Many people often encounter the problem of insufficient power on their devices, especially when they need to travel or do important work. Slow charging of devices may be caused by insufficient power of the charger, faulty charging interface or the use of mismatched charging cables. These problems not only affect the efficiency of device use, but also increase the anxiety of users. There are two main ways to solve this problem: Choose a more powerful charger: A high-power charger can provide a faster charging experience and save waiting time. Make sure to use compatible charging cables and interfaces: Using mismatched charging devices may result in slower charging speeds. Using charging methods designed for your device can significantly improve charging efficiency. Considering these issues, the MECHANIC V-Power series of fast chargers provides users with solu...
Read more